1* PID Temperature Control Box
1* Heating Coil (20 mm in diameter)
1* Hybrid Quartz Nail (2 Grade Titanium and Quartz) with 10/14/18 mm male and female joint
1* Titanium Cap
2* Silicone Wax Container
1* Exquisite Zipper Bag
How to use the Enail?
- Connect the control box, coil and nail. Plug in the power supply of the controller box and turn on the switch, no need other operation, the temperature automatically rises from room temperature (typically 70 degrees Fahrenheit) to 710 degrees Fahrenheit. Then add the smoke cream (rosin, shatter, butane hash oil or other cannabis concentrates.) in to the nail and enjoy your dab! Note: Don't burn the nail for a long time without any smoke cream in it.
- If you do not want to heat up to 710F, you can adjust the temperature by yourself, but we recommended that beginners do not change the settings at first use, because it has been set to the most suitable temperature 710F for dabbing.
- The maximum temperature can be adjusted to 1300 degrees Fahrenheit, but it is better not to use it at such high temperature for a long time, because it may easily damage the machine.
- "∧" and "∨" are the buttons for change the temperature you want.
- "Set" is the password key, and the ">" key means the next step. These two buttons are used to reset the whole system. Generally, you don't need to use the two buttons unless you have already familiar with the machine.
- All the heating coil we sold are 100 Watts (actually can up to 120 Watts). If you think the temperature rise too slow for you, or you need a higher wattage to heat, you can replace with other coil with higher wattage.
- The temperature rise or fall by 1 degree Fahrenheit, but it is heat up fast in the beginning, generally heat up 20-30 F every second.
Based on 2 reviews
Local shops tried overcharging. For an affordable price, this is the perfect way to get into enails.
Great for conserving your supply. Each time last way longer. No cough. Easy-to-use